Live Chat Help

▶ Adding Sensors to System

Follow

  • If you bought one of our packages, all sensors are already programmed for you
  • However if you are adding additional sensors or reprogramming your existing sensors, the process is very easy
  • You can also use this process to move a sensor to a different zone. By default each zone has only one sensor in it, but you may add as many sensors to one zone as you like. However, for proper functionality of motion detectors, keep them in individual zones and do not add other sensor types (like window/door contact sensors) to that same zone.
  • You can not individually delete a sensor. If you wish to clear all sensors, enter PASSWORD # 7 *. Undertake this step with caution and be careful not to confuse it with 7 #. If you do not want to use a sensor, simply remove the battery and store the sensor and battery in a safe place.
  • During programming, physically switch off any motion detectors that may detect you. If you are programming motion detectors, keep them switched off until it is time to trigger the sensor. After you have triggered the motion detector, switch it off again and leave it off until you are finished programming sensors. If you do not follow these instruction, a motion detector may become attached to an unintended zone.

To add a sensor:

  1. Enter on the main panel PASSWORD # (or PASSWORD PROGRAM). The Home and Out lights come on.
  2. Enter 7 #
  3. Enter the two digit zone number you wish to put the sensor in. For instance if you want to put it in zone eight, enter 08.
  4. Now trigger the sensor. The main panel will double beep.
  5. If you need to add more sensors right away, start at Step 3 again. Otherwise, press RETURN. 

To change a zone to Emergency type:

  1. Enter on the main panel PASSWORD # (or PASSWORD PROGRAM). The Home and Out lights come on.
  2. Enter *
  3. For the zone you want to change the type of, enter the two digit zone number
  4. Type 2 3 #
  5. Press RETURN

To change a zone to Delay type:

  1. Enter on the main panel PASSWORD # (or PASSWORD PROGRAM). The Home and Out lights come on.
  2. Enter *
  3. For the zone you want to change the type of, enter the two digit zone number
  4. Type 2 5 #
  5. Press RETURN
Have more questions? Submit a request

Comments

Powered by Zendesk