Live Chat Help

▶ My black wireless siren doesn't work/I have a new black wireless siren

Follow

The video below walks you through registering the siren with the Main Panel. If you are unable to watch the video, read carefully through these steps and then follow them exactly.

  1. Ensure Main Panel is powered and press Disarm (open lock symbol) on a remote control
  2. Unplug the Main Panel’s attached siren (to avoid noise)
  3. Press the Alarm button (speaker icon) on the remote control
    The Main Panel LCD display shows the remote control’s zone (usually 30-32) and the alarm LED is on
  4. Connect the siren power cable, wait 1 second, then disconnect it
    The siren emits a two beep
    Connect the siren power cable, wait 1 second, then disconnect it
    The siren emits a two beep
    Connect the siren power cable and leave the cable connected
    The siren emits a sequence of beeps
  5. Press the Disarm (open lock symbol) on the remote
    The remote siren emits two beeps
  6. Immediately disconnect the siren’s power cable for 3 seconds then reconnect
    The remote siren emits two beeps
    The siren is now programmed. Test by triggering your alarm.

Keywords: external siren, outdoor siren

Have more questions? Submit a request

Comments

Powered by Zendesk